To pair your IMeasureU sensors to your Windows PC you can follow these simple steps.
Note: before starting the pairing process ensure that the supplied Bluetooth dongle is plugged in and working, and the drivers are up to date. We have a...
Connecting your IMeasureU sensors in Nexus is very similar to connecting other 3rd party devices. Follow these steps to complete the process:
Open nexus 2.7 – previous versions of Nexus do not support IMU integration
In system pane...
Data collection using the IMeasureU sensors in Nexus is a simple process and is simultaneous with optical cameras and devices already in the system. It is the same process that you would normally use to capture data with Vicon Nexus.
These are...
Vicon Nexus 2.8.x
To transfer the complete data from the IMeasureU sensors into Vicon Nexus you will need to follow the following steps:
Connect your IMU senor to the computer using the cable provided
Open IMU transfer tab (in the...
Exporting IMeasureU data from Vicon Nexus is quite simple and similar to how you would normally export Vicon Nexus data. Ensure that you have transferred the data from the IMU sensors before exporting the data so that you have the full data set...
If you haven't used the IMeasureU sensors on the PC you're connecting to before, be sure to check out our first use guide as the senors need to be paired to the PC first.
Are they on, paired and connected to the computer?
In the Windows...
